Revolutions

When parts are rotating, their speed can always be measured. Speed sensors which are directly attached to the shaft are usually suitable for this. If this is not possible, other measuring principles must be used where, e.g. the rotating part is measured on the front side. In order to reliably measure the speed in this arrangement, defined points per revolution must be measured. Eddy current sensors, capacitive and laser sensors are used for this.

Detection of turbocharger rotor dynamics

In order to inspect the behavior of turbochargers during different stress states, eddy current displacement sensors are applied in turbocharger test benches. The miniature design of the sensors and their ...

Show details

Speed measurement on automatic abrasive cutting machine

Tiles and special bricks are processed according to their type on automatic abrasive cutting machines. The objective is fast throughput times with the best quality result. Here, the setting parameters ...

Show details

Turbochargers

Apart from the angle of the guide vanes, the speed of the vanes on the turbine wheel is important for the performance of the turbocharger. The rotation of the vanes is measured on the face side for this. ...

Show details

Micro-Epsilon Messtechnik
Königbacher Str. 15
94496 Ortenburg, Germany
info@allandievalentino.com
+49 8542 / 168 - 0
+49 8542 / 168 - 90